{"title":"Solar Simulator","description":"\u003cp\u003eA solar simulator produces light that approximates sunlight so that solar cells can be tested under controlled, repeatable illumination. Combined with an I-V test system it gives efficiency, fill factor, open-circuit voltage and short-circuit current.\u003c\/p\u003e\u003ch3\u003eHow to choose\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLight source:\u003c\/b\u003e Ossila LED Solar Simulator (G2009B2) and lamp (G2009A1), or the ABET Technologies 10500 low-cost solar simulator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMeasurement:\u003c\/b\u003e Ossila Solar Cell I-V Test System (T2002F2) and the automated I-V test system bracket (A2006A1).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help choosing a model or a formal quotation (PO, tax invoice)? Contact the AMI Scientific team via WhatsApp.\u003c\/p\u003e","products":[{"product_id":"solar-simulator-10500-low-cost-abet-technologies","title":"Solar Simulator Biaya Rendah ABET 10500","description":"\u003ch3\u003eDeskripsi\u003c\/h3\u003e\n\u003cp\u003eSolar Simulator 10500 Low Cost dari ABET TECHNOLOGIES adalah instrumen laboratorium yang dirancang untuk menghasilkan spektrum cahaya menyerupai sinar matahari secara terkontrol dan stabil. Alat ini digunakan utama untuk pengujian sel surya (photovoltaic), karakterisasi material semikonduktor, serta pengukuran respons fotolistrik di bawah kondisi pencahayaan yang dapat direproduksi.\u003c\/p\u003e\n\u003cp\u003eAplikasi umumnya meliputi riset dan pengembangan energi terbarukan, studi fotokatalisis, pengujian degradasi material akibat paparan cahaya, serta kegiatan kalibrasi sensor optik. Instrumen ini banyak dimanfaatkan di laboratorium universitas, lembaga penelitian, dan industri yang bergerak di bidang teknologi surya dan material maju.\u003c\/p\u003e\n\u003ch3\u003eSpesifikasi\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMerek\/Vendor: ABET TECHNOLOGIES\u003c\/li\u003e\n\u003cli\u003eNomor CAS: tidak tersedia (instrumen peralatan, bukan bahan kimia)\u003c\/li\u003e\n\u003cli\u003eKategori: ABET TECHNOLOGIES\u003c\/li\u003e\n\u003cli\u003eVarian\/Kemasan: Solar Simulator 10500 Low Cost, unit instrumen benchtop\u003c\/li\u003e\n\u003cli\u003eCatatan penanganan: simpan di ruangan kering, bersih, dan bebas debu; hindari menyentuh bagian optik\/lampu secara langsung; pastikan suplai listrik stabil sesuai spesifikasi pabrikan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnglish\u003c\/h3\u003e\n\u003cp\u003eThe Solar Simulator 10500 Low Cost by ABET TECHNOLOGIES is a laboratory instrument designed to produce a controlled, stable light spectrum that closely simulates natural sunlight. It is commonly used for photovoltaic cell testing, semiconductor material characterization, and photocatalysis research under reproducible illumination conditions. This instrument is well suited for universities, research institutions, and industries working in solar energy and advanced materials development.\u003c\/p\u003e","brand":"ABET TECHNOLOGIES","offers":[{"title":"Default Title","offer_id":47039994790106,"sku":"AB250001","price":215395000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/ABET_49f82e41-79b4-47c2-8afb-cc64c3e47731.jpg?v=1761019146"},{"product_id":"os240001","title":"Ossila Solar Cell I-V Test System without Solar Simulator T2002F2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Ossila Solar Cell I-V Test System T2002F2 is a compact source-measure setup for characterizing photovoltaic devices in the research lab. It records the current-voltage curve of a solar cell, and the bundled PC software then works out the main device metrics: power conversion efficiency (PCE), fill factor (FF), short-circuit current density (Jsc), open-circuit voltage (Voc), maximum power (Pmax), shunt resistance (Rsh) and series resistance (Rs).\u003c\/p\u003e\n\u003cp\u003eThe unit sources voltages from -10 V to +10 V with a resolution down to 170 µV and measures currents from ±10 nA up to ±200 mA. The software supports custom settle times, forward and backward sweeps for hysteresis studies, stabilized current output, maximum power point tracking and repeated lifetime measurements to follow device stability over time.\u003c\/p\u003e\n\u003cp\u003eThis configuration is supplied without a solar simulator; a solar simulator is required to obtain standard efficiency measurements. In the manual version, switches on the test board are used to select each pixel, and the T2002F test board suits Ossila S241 and S251 substrates (75 x 25 mm).\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasuring current-voltage curves of solar cells and automatically extracting PCE, FF, Jsc, Voc, Pmax, Rsh and Rs.\u003c\/li\u003e\n\u003cli\u003eTracking the stability of solar cell properties through periodic I-V measurements over extended periods.\u003c\/li\u003e\n\u003cli\u003eStudying device hysteresis with consecutive forward and backward voltage sweeps.\u003c\/li\u003e\n\u003cli\u003eFollowing the maximum power point, Jmp and Vmp of a photovoltaic device over time.\u003c\/li\u003e\n\u003cli\u003eTesting multi-pixel devices fabricated on Ossila 75 x 25 mm substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: T2002F2\u003c\/li\u003e\n\u003cli\u003eVoltage source range: ± 10 V\u003c\/li\u003e\n\u003cli\u003eVoltage source accuracy: 10 mV\u003c\/li\u003e\n\u003cli\u003eVoltage source resolution: 170 µV\u003c\/li\u003e\n\u003cli\u003eVoltage measure range: ± 10V\u003c\/li\u003e\n\u003cli\u003eVoltage measure resolution: 10 µV\u003c\/li\u003e\n\u003cli\u003eCurrent measure ranges: ± 200 mA, ± 20 mA, ± 2 mA, ± 200 µA, ± 20 µA\u003c\/li\u003e\n\u003cli\u003eBest current resolution: 0.1nA\u003c\/li\u003e\n\u003cli\u003eBurden voltage: \u0026lt;20 mV\u003c\/li\u003e\n\u003cli\u003eSubstrate compatibility: S241, S251 (75 x 25 mm)\u003c\/li\u003e\n\u003cli\u003eSource measure unit dimensions (W x H x D): 125 mm x 55 mm x 185 mm\u003c\/li\u003e\n\u003cli\u003eTest board dimensions (T2002F): 100 mm x 40 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003ePower adapter: 24 VDC\u003c\/li\u003e\n\u003cli\u003eOperating system: Windows 11 (64-bit)\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB 2.0, or Ethernet (requires DHCP)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902078533850,"sku":"OS240001","price":94649000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/s241-s251-solar-cell-iv-test-system-manual_380x380_7775f1b2-e5f7-4216-af81-283109998186.jpg?v=1779263354"},{"product_id":"os240007","title":"Ossila LED Solar Simulator G2009B2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Ossila LED Solar Simulator G2009B2 is a steady-state, LED-based light source for photovoltaic testing of small-area solar cells. Classified to IEC 60904-9:2020, it reaches AAA over a 15 mm diameter area and ABA over a 25 mm diameter area, delivering 1000 W\/m2 (1 Sun) at an 8.5 cm working distance across 350 nm - 1000 nm.\u003c\/p\u003e\n\u003cp\u003eEach LED can be power-controlled individually, so the spectrum can be tuned to particular lighting conditions, including calibration for indoor photovoltaics. The lamp is ready within minutes, runs for up to 10000 hours, needs minimal maintenance and carries no explosion risk. Every unit is calibrated with a NIST traceable spectroradiometer and ships with a performance report.\u003c\/p\u003e\n\u003cp\u003eControl is handled through the Ossila Solar Simulator Console software over USB, or via a serial command library for specialist measurements. An optical breadboard and adjustable height stand are supplied, allowing the compact lamp to sit on a bench or mount to larger optical tables.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent-voltage testing of small-area solar cells under 1 Sun illumination.\u003c\/li\u003e\n\u003cli\u003eTesting larger devices on 25 mm x 25 mm substrates with ABA-class illumination.\u003c\/li\u003e\n\u003cli\u003eLong-term stability and lifetime measurements of photovoltaic devices.\u003c\/li\u003e\n\u003cli\u003eIndoor photovoltaic testing using a tuned spectral output.\u003c\/li\u003e\n\u003cli\u003eOptoelectronic research requiring a simulated sunlight environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: G2009B2\u003c\/li\u003e\n\u003cli\u003eType: LED-based, steady state\u003c\/li\u003e\n\u003cli\u003eSpectral Match: A\u003c\/li\u003e\n\u003cli\u003eSpatial Uniformity (15 mm diameter): A\u003c\/li\u003e\n\u003cli\u003eSpatial Uniformity (25 mm diameter): B\u003c\/li\u003e\n\u003cli\u003eSpatial Uniformity (32 mm diameter): C\u003c\/li\u003e\n\u003cli\u003eTemporal Instability: A\u003c\/li\u003e\n\u003cli\u003eSpectral Deviation: \u0026lt;70%\u003c\/li\u003e\n\u003cli\u003eSpectral Coverage: \u0026gt;80%\u003c\/li\u003e\n\u003cli\u003eWorking Distance: 8.5 cm (3.35\")\u003c\/li\u003e\n\u003cli\u003eIrradiance: 1000 W\/m2 (+\/- 5% at working distance and calibration temperature)\u003c\/li\u003e\n\u003cli\u003eWavelength Range: 350 nm - 1000 nm\u003c\/li\u003e\n\u003cli\u003eMaximum Lamp Time: 10000 hours\u003c\/li\u003e\n\u003cli\u003eLamp Dimensions (L x W x H): 10.5 cm x 9.0 cm x 8.0 cm (4.13\" x 3.54\" x 3.15\")\u003c\/li\u003e\n\u003cli\u003eWeight: 600 g (1.32 lbs)\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe simulator is not intended for use in volatile environments.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902078697690,"sku":"OS240007","price":99630000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/solar-simulator-with-light-product-photo_8a229d61-6661-4fdf-9d9e-fe30ea12bc3b.jpg?v=1779263681"},{"product_id":"os240010","title":"Ossila LED Solar Simulator Lamp G2009A1","description":"\u003cp\u003eType LED-Based, Steady State Spectral Deviation : \u0026lt;70% Spectral Coverage : \u0026gt;80% Working Distance : 8.5 cm (3.35\") Irradiance (at working distance) : 1000 W\/m2 Maximum Lamp Time : 10000 hours Dimensions (L x W x H) : 10.5 cm x 9.0 cm x 8.0 cm (4.13\" x 3.54\" x 3.15\") Weight : 600 g (1.32 lbs)\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902078927066,"sku":"OS240010","price":79704000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/solar-simulator-head-product-photo.webp?v=1760430465"},{"product_id":"ossila-automated-i-v-test-system-solar-simulator-bracket-a2006a1","title":"Ossila Automated I-V Test System Solar Simulator Bracket A2006A1","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Ossila A2006A1 bracket is a mounting accessory that joins an Ossila LED Solar Simulator lamp to an Automated Solar Cell I-V Test System. It ships as part of the Automated Solar Cell Testing Kit, and it also lets labs combine a simulator and test system that were purchased separately.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: the base screws onto the I-V test system with the screws provided, and the lamp attaches to the plate that sits above the automated test board. Use the upper pair of holes with the 20 x 15 mm substrate test board (S2006) or the lower pair with the 25 x 25 mm substrate board (S211). In either configuration the lamp is held at a fixed 8.5 cm working distance from the substrate, which removes a source of positioning error and supports repeatable I-V measurements.\u003c\/p\u003e\n\u003cp\u003eThe bracket works with all Ossila solar simulator lamps, with or without the indoor light filter, and with automated test systems T2003B3 and T2003E3 purchased from November 4 2022 (marked J1000A3-xxxx on the underside). It is not compatible with generic riser boards.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding an integrated I-V measurement setup with automatic pixel switching under solar illumination.\u003c\/li\u003e\n\u003cli\u003eRetrofitting a compatible existing automated I-V test system with an Ossila solar simulator.\u003c\/li\u003e\n\u003cli\u003eCharacterising solar cells on 20 x 15 mm or 25 x 25 mm substrates at a consistent lamp-to-sample distance.\u003c\/li\u003e\n\u003cli\u003eImproving repeatability when analysing device metrics such as fill factor, open-circuit voltage and power conversion efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: A2006A1\u003c\/li\u003e\n\u003cli\u003eDimensions: 135 x 152 x 135 mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFixed Lamp Height: 85 mm\u003c\/li\u003e\n\u003cli\u003eWorking Distance: 8.5 cm\u003c\/li\u003e\n\u003cli\u003eCompatible Substrates: 20 x 15 mm (S2006) or 25 x 25 mm (S211)\u003c\/li\u003e\n\u003cli\u003eCompatible Test Systems: T2003B3 and T2003E3 purchased from November 4 2022 (code J1000A3-xxxx)\u003c\/li\u003e\n\u003cli\u003eIn the Box: Fixed solar simulator bracket, attachment screws and allen keys\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":48282193789146,"sku":"OS262047","price":7473000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/automated-i-v-test-system-solar-simulator-bracket.jpg?v=1785410824"}],"url":"https:\/\/amiscientific.com\/en\/collections\/solar-simulator.oembed","provider":"AMI Scientific","version":"1.0","type":"link"}