{"title":"Spin Coater","description":"\u003cp\u003eA spin coater deposits a uniform thin film by spinning a flat substrate at high speed so that a liquid coating spreads by centrifugal force. It is used for photoresists, polymer and perovskite films, sol-gel layers and nanomaterial coatings.\u003c\/p\u003e\u003ch3\u003eHow to choose\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eStandard or Advanced:\u003c\/b\u003e AMI supplies the Ossila Spin Coater Standard (L2001A3) and Advanced (L2001B2).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDispensing:\u003c\/b\u003e add a single or dual syringe pump for repeatable, hands-free dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChuck:\u003c\/b\u003e polypropylene (PP) or PTFE chucks, multi-substrate or custom sizes; PTFE suits aggressive solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help choosing a model or a formal quotation (PO, tax invoice)? Contact the AMI Scientific team via WhatsApp.\u003c\/p\u003e","products":[{"product_id":"os240012","title":"Ossila Spin Coater Single Syringe Pump Chuck Multi-substrate PP L2001A3-L2003S2-U1","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila Spin Coating System pairs the Standard V3 spin coater (L2001A3) with a single-channel syringe pump, a connection adapter, disposable syringes, PTFE tubing and needles. It automates solution dispensing during spin coating, so thin film fabrication becomes more repeatable and less dependent on manual technique.\u003c\/p\u003e\n\u003cp\u003eThe spin coater runs from 120 to 6,000 rpm with speed stability within \u0026lt;2% error and spin times of 1 to 1,000 sec. It has a polypropylene bowl, steel casing and tempered glass lid, accepts substrates up to 100 mm (4\") in diameter, and stores multi-step recipes in its built-in software. This version ships with a multi-substrate polypropylene chuck that holds common substrate formats.\u003c\/p\u003e\n\u003cp\u003eThe syringe pump supports infusion and withdrawal, clamps syringes from 0.5 μl to 60 ml, and is driven by a NEMA 17 stepper motor with 1\/128 micro stepping and a rate accuracy of ±0.16%. Neither unit needs an external PC. With the adapter fitted, manual dispensing is still possible, and both units can also be used on their own. The US plug variant is supplied.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with controlled solution dispense rate and volume.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching, where solvent addition must follow the initial solution after a precise delay.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer spin coating of multilayered structures.\u003c\/li\u003e\n\u003cli\u003eStandalone spin coating or syringe pump dispensing for experiments that need only one unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003S2-U1-US\u003c\/li\u003e\n\u003cli\u003eSpin speed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eSpin coater dimensions (D x W x H): 225 mm x 170 mm x 140 mm\u003c\/li\u003e\n\u003cli\u003eChuck: Multi-substrate, polypropylene\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 1\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl – 60 ml\u003c\/li\u003e\n\u003cli\u003ePump operation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003ePump rate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003ePump motor: NEMA 17 stepper motor\u003c\/li\u003e\n\u003cli\u003ePlug type: Type B (US)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe spin coater has a magnetic safety switch on the door, a built-in spirit level and adjustable feet. The syringe pump has limit switches and crash sensing, and it should be operated at 5 °C – 40 °C and up to 80% RH at 31 °C.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902079156442,"sku":"OS240012","price":151936000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/Product-Image-Single-Syringe-Pump.webp?v=1760430465"},{"product_id":"os240013","title":"Ossila Spin Coater Dual Syringe Pump Chuck Multi-substrate PP L2001A3-L2003D2-U1","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila Spin Coating System pairs the Standard V3 spin coater (L2001A3) with a dual syringe pump and a polypropylene multi-substrate chuck. It is built for labs that want to automate solution deposition during spin coating and produce thin films more reproducibly. A connection adapter, disposable syringes, PTFE tubing and needles are included so the pump can dispense directly onto the spinning substrate.\u003c\/p\u003e\n\u003cp\u003eThe spin coater runs from 120 to 6,000 rpm with spin times of 1 to 1,000 sec and accepts substrates up to 100 mm (4\") in diameter. The dual syringe pump offers two independently controlled channels, infusion and withdrawal modes, and clamps for syringes from 0.5 μl to 60 ml. Both units have built-in software, so multi-step programs can be created and stored without an external PC.\u003c\/p\u003e\n\u003cp\u003eUp to four different solutions can be dispensed separately, which suits layer-by-layer coating and antisolvent quenching. Manual pipetting remains possible with the adapter in place, and each unit can also be used on its own.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated deposition of thin films by spin coating with controlled dispense rate and volume.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching where the solvent must be added after a precise delay.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer spin coating of multilayered structures using two independent pump channels.\u003c\/li\u003e\n\u003cli\u003eStandalone syringe pump infusion or withdrawal for experiments that do not need the spin coater.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003D2-U1-US\u003c\/li\u003e\n\u003cli\u003eSpin coater model: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eChuck substrate sizes: 20mm x 15mm, 25mm x 25mm, 50mm x 50mm, 75mm x 25mm\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 2, independent channel control\u003c\/li\u003e\n\u003cli\u003eSyringe size: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003eOperation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 260 mm\u003c\/li\u003e\n\u003cli\u003ePump rate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump operating temperature: 5 °C – 40 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe spin coater has a magnetic safety switch on the door, a built-in spirit level and adjustable feet. The syringe pump includes limit switches and crash sensing and should be operated between 5 °C – 40 °C at up to 80% RH at 31 °C.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902079189210,"sku":"OS240013","price":191788000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/Product-Image-Duel-Syringe-Pump.webp?v=1760430464"},{"product_id":"os240018","title":"Ossila Spin Coater Single Syringe Pump Chuck Multi-substrate PTFE L2001A3-L2003S2-U2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila Spin Coating System pairs the Standard V3 spin coater (L2001A3) with a single-channel syringe pump, a connection adapter, disposable syringes, PTFE tubing and needles. This configuration includes a PTFE multi-substrate chuck and a Type B (US) power plug. Pump-controlled dispensing replaces hand pipetting, reducing operator error and making thin film runs easier to reproduce.\u003c\/p\u003e\n\u003cp\u003eThe adapter lets up to four different solutions be dispensed separately, supporting layer-by-layer coating and antisolvent quenching, while manual dispensing remains possible without removing it. The spin coater runs from 120 – 6,000 rpm with spin times of 1 – 1,000 sec and accepts substrates up to 100 mm (4\") diameter. The chuck holds 20mm x 15mm, 25mm x 25mm, 50mm x 50mm and 75mm x 25mm substrates.\u003c\/p\u003e\n\u003cp\u003eThe syringe pump supports infusion and withdrawal with syringes from 0.5 μl to 60 ml, driven by a NEMA 17 stepper motor with ±0.16% rate accuracy. Both units have built-in software, so multi-step programs can be stored without an external PC, and each can also be used on its own.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with controlled solution dispensing.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching where precise timing between solution and solvent addition is needed.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer deposition of multilayered structures using separately dispensed solutions.\u003c\/li\u003e\n\u003cli\u003eStand-alone syringe pump infusion or withdrawal for experiments that do not need spin coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003S2-U2-US\u003c\/li\u003e\n\u003cli\u003eSpin speed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eChuck substrate sizes: 20mm x 15mm; 25mm x 25mm; 50mm x 50mm; 75mm x 25mm\u003c\/li\u003e\n\u003cli\u003eSpin coater dimensions (D x W x H): 225 mm x 170 mm x 140 mm\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 1\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003ePump operation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003ePump rate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump motor: NEMA 17 stepper motor\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003eSpin coater power supply: DC 24 V 2 A, via 100–240 V 50\/60 Hz power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe syringe pump operates at 5 °C – 40 °C and up to 80% RH at 31 °C. The spin coater has a magnetic safety switch on the door, and the pump includes limit switches and crash sensing. Use the built-in spirit level and adjustable feet to level the coater before use.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902079418586,"sku":"OS240018","price":155689000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/spin-coating-kit-product-photo.webp?v=1760430464"},{"product_id":"os240184","title":"Ossila Spin Coater Standard L2001A3","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Ossila Spin Coater Standard V3 (L2001A3) is a compact, vacuum-free bench instrument for depositing uniform thin films on substrates up to 100 mm (4\") in diameter. It needs no vacuum line, only a single mains socket, so it can run on an open bench, inside a fume hood or within a glove box.\u003c\/p\u003e\n\u003cp\u003eInstead of holding substrates by suction, the smart chuck keeps them flat and drains excess solution away, avoiding the warping that vacuum seal rings can cause on thin or flexible substrates. A rimmed edge improves airflow uniformity and limits solvent build-up in the bowl, while simplified drainage channels add mechanical stability. The supplied multi-substrate chuck fits the four most common substrate sizes, and custom chucks can be made for other geometries.\u003c\/p\u003e\n\u003cp\u003eThe Standard model spins from 120 – 6,000 rpm with \u0026lt;2% speed error and spin times of 1 – 1,000 sec. Its control system stores 10 user profiles, each with 10 programs of up to 50 steps, which suits shared labs. A built-in spirit level and adjustable feet help set a flat spinning axis, and a magnetic door switch adds safety.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpin coating uniform thin films on rigid or flexible substrates without warping.\u003c\/li\u003e\n\u003cli\u003ePreparing polymer thin films, such as block copolymer films, with reproducible thickness.\u003c\/li\u003e\n\u003cli\u003eDepositing layers for perovskite solar cell research.\u003c\/li\u003e\n\u003cli\u003eRunning thin-film work inside glove boxes or fume hoods where vacuum lines are impractical.\u003c\/li\u003e\n\u003cli\u003eStoring multi-step coating recipes for several users in shared research labs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3\u003c\/li\u003e\n\u003cli\u003eModel: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed Stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eAcceleration \/ Deceleration Control: No\u003c\/li\u003e\n\u003cli\u003eSpin Time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eUser Profiles: 10\u003c\/li\u003e\n\u003cli\u003ePrograms per User: 10\u003c\/li\u003e\n\u003cli\u003eSteps: Up to 50 steps per program (on each user profile)\u003c\/li\u003e\n\u003cli\u003eMax Substrate Size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eMaterials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eWeight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eDimensions (D x W x H): 225 mm x 170 mm x 140 mm (8.86\" x 6.69\" x 5.51\")\u003c\/li\u003e\n\u003cli\u003ePower Supply: DC 24 V 2 A, via 100–240 V 50\/60 Hz power adapter\u003c\/li\u003e\n\u003cli\u003eSafety Switch: Magnetic safety switch on the door\u003c\/li\u003e\n\u003cli\u003eStandard Chuck Substrate Sizes: 20 mm x 15 mm, 25 mm x 25 mm, 50 mm x 50 mm, 75 mm x 25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eUse the built-in spirit level and adjustable feet to level the unit before spinning. The lid is fitted with a magnetic safety switch on the door. Power the instrument only through the supplied 100–240 V 50\/60 Hz adapter.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Multi-substrate PTFE","offer_id":47902085742810,"sku":"OS240184","price":100892000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PP","offer_id":47902085775578,"sku":"OS240185","price":99630000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PTFE","offer_id":47902085808346,"sku":"OS240186","price":107103000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/spin-coater-product-photo_380x380_f8ffc355-716a-4fbe-9401-1d043e5c6cdf.jpg?v=1779345967"},{"product_id":"os240187","title":"Ossila Spin Coater Advanced L2001B2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Ossila Spin Coater Advanced (L2001B2) is a compact, vacuum-free benchtop instrument for depositing uniform thin films. Because it needs no vacuum line, it runs from a single mains socket and fits on a lab bench, in a fume hood or inside a glove box. Substrates are held flat on a smart chuck design, so even thin or flexible substrates coat without warping while excess solution drains away.\u003c\/p\u003e\n\u003cp\u003eThe Advanced model spins from 500 to 10,000 rpm with speed stability better than 0.25% error, and gives control of acceleration (up to 4000 rpm\/s) and deceleration (up to 700 rpm\/s). Spin times run from 1 to 3,600 sec, supporting slower solvent evaporation, multilayer coatings and graded film properties.\u003c\/p\u003e\n\u003cp\u003eFor shared labs, the controller stores 10 user profiles, each holding 15 programs of up to 50 steps. The multi-substrate chuck fits 20 x 15 mm, 25 x 25 mm, 50 x 50 mm and 75 x 25 mm substrates, and custom chucks can be made for other sizes. A built-in spirit level, adjustable feet and a magnetic door safety switch complete the design.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpin coating uniform polymer and block copolymer thin films with reproducible thickness.\u003c\/li\u003e\n\u003cli\u003eDepositing layers for perovskite solar cell research.\u003c\/li\u003e\n\u003cli\u003eCoating flexible or thin substrates without vacuum-induced warping.\u003c\/li\u003e\n\u003cli\u003eBuilding multilayer coatings and graded films in advanced materials development.\u003c\/li\u003e\n\u003cli\u003eSpin coating inside a glove box or fume hood where a vacuum line is impractical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001B2\u003c\/li\u003e\n\u003cli\u003eSpeed: 500 – 10,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed Stability: \u0026lt;0.25% error\u003c\/li\u003e\n\u003cli\u003eMaximum Acceleration: 4000 rpm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Deceleration: 700 rpm\/s\u003c\/li\u003e\n\u003cli\u003eMinimum Acc\/Dec: 10 rpm\/s\u003c\/li\u003e\n\u003cli\u003eSpin Time: 1 – 3,600 sec\u003c\/li\u003e\n\u003cli\u003eUser Profiles: 10\u003c\/li\u003e\n\u003cli\u003ePrograms per User: 15\u003c\/li\u003e\n\u003cli\u003eSteps: Up to 50 steps per program (on each user profile)\u003c\/li\u003e\n\u003cli\u003eMaterials: PTFE bowl, powder coated steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eMax Substrate Size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eDimensions (D x W x H): 225 mm x 170 mm x 140 mm (8.86\" x 6.69\" x 5.51\")\u003c\/li\u003e\n\u003cli\u003eWeight: 3.7 kg\u003c\/li\u003e\n\u003cli\u003ePower Supply: DC 24 V 2 A, via 100–240 V 50\/60 Hz power adapter\u003c\/li\u003e\n\u003cli\u003eSafety Switch: Magnetic safety switch on the door\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eA magnetic safety switch on the door protects the user during operation. Use the built-in spirit level and adjustable feet to keep the spinning axis flat after moving the unit. Chucks are made of chemical-resistant PTFE or PEEK and have finger cutouts for easy removal and exchange between experiments.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Multi-substrate PTFE","offer_id":47902085841114,"sku":"OS240187","price":122047000.0,"currency_code":"IDR","in_stock":true},{"title":"Multi-substrate PEEK","offer_id":47902085873882,"sku":"OS240188","price":127029000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PTFE","offer_id":47902085906650,"sku":"OS240189","price":128291000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PEEK","offer_id":47902085939418,"sku":"OS240190","price":135763000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/spin-coater-advanced-product-photo_380x380_f52b19c3-9c29-462e-a96c-11f32c6e26cc.jpg?v=1779345998"},{"product_id":"os240191","title":"Ossila Spin Coater Advanced Single Syringe Pump L2001B2-L2003S2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila bundle pairs the Advanced spin coater (L2001B2) with a single syringe pump, so solution deposition can be automated rather than done by hand. The kit includes a connection adapter, disposable syringes, PTFE tubing and needles, giving a ready setup for repeatable thin film fabrication with less operator error.\u003c\/p\u003e\n\u003cp\u003eThe Advanced spin coater runs from 500 to 10,000 rpm with speed stability better than 0.25% error, programmable acceleration up to 4000 rpm\/s and deceleration up to 700 rpm\/s, and spin times of 1 to 3,600 sec. It has a PTFE bowl, powder coated steel casing and tempered glass lid, and accepts substrates up to 100 mm (4\") diameter.\u003c\/p\u003e\n\u003cp\u003eThe single syringe pump supports infusion and withdrawal with syringes from 0.5 μl to 60 ml, driven by a NEMA 17 stepper motor with ±0.16% rate accuracy. Both units carry built-in software, so multi-step programs can be stored without an external PC. The adapter still allows manual dispensing, and either unit can also be used on its own. The bundle is supplied with a multi-substrate chuck; custom chucks are also an option.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with controlled dispense rate and volume.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching, where precise timing between solution and solvent addition is required.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer spin coating of multilayered structures.\u003c\/li\u003e\n\u003cli\u003eStandalone syringe pump infusion or withdrawal for experiments that do not need spin coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001B2-L2003S2\u003c\/li\u003e\n\u003cli\u003eSpin speed: 500 – 10,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;0.25% error\u003c\/li\u003e\n\u003cli\u003eMaximum acceleration: 4000 rpm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum deceleration: 700 rpm\/s\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 3,600 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: PTFE bowl, powder coated steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 3.7 kg\u003c\/li\u003e\n\u003cli\u003eSpin coater dimensions (D x W x H): 225 mm x 170 mm x 140 mm\u003c\/li\u003e\n\u003cli\u003eSyringe pump dimensions (W x H x D): 240 mm x 150 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003eOperation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003ePump motor: NEMA 17 stepper motor\u003c\/li\u003e\n\u003cli\u003eRate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump maximum speed: 5mm.s -1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe spin coater has a magnetic safety switch on the door, and the syringe pump includes limit switches and crash sensing. Operate the syringe pump at 5 °C – 40 °C and up to 80% RH at 31 °C.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Multi-substrate PTFE","offer_id":47902085972186,"sku":"OS240191","price":176844000.0,"currency_code":"IDR","in_stock":true},{"title":"Multi-substrate PEEK","offer_id":47902086004954,"sku":"OS240192","price":181825000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PTFE","offer_id":47902086037722,"sku":"OS240193","price":183087000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PEEK","offer_id":47902086070490,"sku":"OS240194","price":186807000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/spin-coating-kit-product-photo_380x380_79fbfebb-c7cf-4a05-b996-c6611916fd06.jpg?v=1779346127"},{"product_id":"os240195","title":"Ossila Spin Coater Dual Syringe Pump Chuck Custom PP L2001A3-L2003D2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila bundle pairs the Standard V3 spin coater (L2001A3) with a dual syringe pump and a custom polypropylene chuck, giving labs an automated way to deposit solutions during spin coating. A connection adapter, disposable syringes, PTFE tubing and needles are included, so the pump can dispense directly onto the spinning substrate for more repeatable films with less operator error.\u003c\/p\u003e\n\u003cp\u003eThe dual pump has two channels that can be run completely independently, and the system can dispense up to four different solutions separately. This suits layer-by-layer coating, antisolvent quenching and other multi-step processes. Manual pipetting remains possible with the adapter in place, and both instruments can also be used on their own.\u003c\/p\u003e\n\u003cp\u003eThe spin coater covers 120 – 6,000 rpm with \u0026lt;2% speed error and accepts substrates up to 100 mm (4\") diameter. The syringe pump works in infusion and withdrawal modes, holds syringes from 0.5 μl to 60 ml and offers ±0.16% rate accuracy. Both units have built-in software for multi-step programs, so no external PC is required.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with controlled dispense rate and volume.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching where the solvent must be added at a precisely timed point.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer deposition of multilayered structures using two independent syringe channels.\u003c\/li\u003e\n\u003cli\u003eStand-alone syringe pump infusion or withdrawal for experiments that do not need spin coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003D2\u003c\/li\u003e\n\u003cli\u003eSpin coater model: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eSpin coater dimensions (D x W x H): 225 mm x 170 mm x 140 mm\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 2, independent channel control\u003c\/li\u003e\n\u003cli\u003eSyringe pump dimensions (W x H x D): 240 mm x 150 mm x 260 mm\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl – 60 ml\u003c\/li\u003e\n\u003cli\u003eOperation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003eRate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003eMaximum linear force: 500 N\u003c\/li\u003e\n\u003cli\u003eChuck: Custom, polypropylene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe spin coater has a magnetic safety switch on the door, and the syringe pump uses limit switches and crash sensing. Operate the pump between 5 °C – 40 °C and up to 80% RH at 31 °C.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":47902086103258,"sku":"OS240195","price":194279000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/spin-coating-dual-kit-product-photo_380x380_e2f234ba-ca3e-4692-8aa1-ee0531a1062f.jpg?v=1779346435"},{"product_id":"os240196","title":"Ossila Spin Coater Advanced Dual Syringe L2001B2-L2003D2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila bundle pairs the Advanced spin coater (L2001B2) with a dual syringe pump, linked by a connection adapter and supplied with disposable syringes, PTFE tubing and needles. Automating solution dispensing during spin coating removes much of the manual effort from demanding depositions, improves repeatability between runs and reduces operator error.\u003c\/p\u003e\n\u003cp\u003eUp to four solutions can be dispensed separately, which suits layer-by-layer coating, antisolvent quenching and other multi-step processes. Each pump on the dual model runs fully independently, and manual pipetting remains possible without taking the adapter off. Both instruments carry built-in software, so multi-step programs are created and stored without an external PC.\u003c\/p\u003e\n\u003cp\u003eThe Advanced spin coater operates from 500 to 10,000 rpm with speed stability better than 0.25% error, programmable acceleration and deceleration, and a PTFE bowl inside a powder coated steel casing with a tempered glass lid. The system ships with a multi-substrate chuck in PTFE or PEEK, with custom chuck options for non-standard substrates up to 100 mm (4\") diameter. The units can also be used separately when an experiment needs only one of them.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated dispensing for repeatable spin-coated thin films.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching where the solvent must be added after a precisely timed delay.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer deposition of multilayered structures using independently controlled syringe channels.\u003c\/li\u003e\n\u003cli\u003eStandalone spin coating or syringe infusion and withdrawal when only one instrument is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001B2-L2003D2\u003c\/li\u003e\n\u003cli\u003eSpin speed: 500 – 10,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;0.25% error\u003c\/li\u003e\n\u003cli\u003eMaximum acceleration: 4000 rpm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum deceleration: 700 rpm\/s\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 3,600 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: PTFE bowl, powder coated steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 3.7 kg\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 2, independent channel control\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003ePump operation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 260 mm\u003c\/li\u003e\n\u003cli\u003ePump rate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump maximum linear force: 500 N\u003c\/li\u003e\n\u003cli\u003eChuck material options: Multi-substrate PTFE, Multi-substrate PEEK, Custom PTFE, Custom PEEK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe spin coater door has a magnetic safety switch, and the syringe pump includes limit switches and crash sensing. Operate the pump between 5 °C and 40 °C at up to 80% RH at 31 °C, and level the spin coater using its built-in spirit level and adjustable feet.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Multi-substrate PTFE","offer_id":47902086136026,"sku":"OS240196","price":216696000.0,"currency_code":"IDR","in_stock":true},{"title":"Multi-substrate PEEK","offer_id":47902086168794,"sku":"OS240197","price":221677000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PTFE","offer_id":47902086201562,"sku":"OS240198","price":222939000.0,"currency_code":"IDR","in_stock":true},{"title":"Custom PEEK","offer_id":47902086234330,"sku":"OS240199","price":230411000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/7156\/8602\/files\/spin-coating-dual-kit-product-photo_380x380_b2d725c4-cf1d-4859-881f-d1c4e8dbe784.jpg?v=1779346188"},{"product_id":"ossila-spin-coater-dual-syringe-pump-chuck-custom-ptfe-l2001a3-l2003d2-u102-us-ue-uk-au","title":"Ossila Spin Coater Dual Syringe Pump Chuck Custom PTFE L2001A3-L2003D2-U102","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila spin coating system pairs the Standard V3 spin coater (L2001A3) with a dual syringe pump and a custom PTFE chuck. It is built for researchers who want automated, repeatable thin film fabrication, with programmed solution deposition replacing labour-intensive manual pipetting and reducing human error.\u003c\/p\u003e\n\u003cp\u003eA connection adapter links the two instruments, and the kit includes disposable syringes, PTFE tubing and needles. Up to four different solutions can be dispensed separately, which suits layer-by-layer coating and antisolvent quenching. Manual dispensing remains possible with the adapter fitted, and both units can also be run on their own. The two channels of the dual pump are controlled independently.\u003c\/p\u003e\n\u003cp\u003eThe Standard V3 spin coater runs from 120 – 6,000 rpm with spin times of 1 – 1,000 sec and accepts substrates up to 100 mm (4\") diameter. The syringe pump handles syringes from 0.5 μl to 60 ml in infusion and withdrawal modes. Both instruments have built-in software, so multi-step programs can be created and stored without an external PC.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with controlled solution dispensing.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching where the solvent must be added at a precisely timed interval after the initial solution.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer deposition of multilayered structures using independently controlled syringe channels.\u003c\/li\u003e\n\u003cli\u003eProcesses requiring separate dispensing of up to four different solutions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003D2-U102-US\u003c\/li\u003e\n\u003cli\u003eSpin coater model: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eMaximum custom chuck diameter: 115 mm\u003c\/li\u003e\n\u003cli\u003eSpin coater dimensions (D x W x H): 225 mm x 170 mm x 140 mm (8.86\" x 6.69\" x 5.51\")\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 2, independent channel control\u003c\/li\u003e\n\u003cli\u003eSyringe pump dimensions (W x H x D): 240 mm x 150 mm x 260 mm (9.8\" x 6.1\" x 10.2\")\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003eOperation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003eRate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003eMaximum linear force: 500 N\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 5 °C – 40 °C (41 °F – 104 °F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":48282209517786,"sku":"OS240040","price":201751000.0,"currency_code":"IDR","in_stock":true}]},{"product_id":"ossila-spin-coater-dual-syringe-pump-chuck-multi-substrate-ptfe-l2001a3-l2003d2-u2-us-eu-uk-au","title":"Ossila Spin Coater Dual Syringe Pump Chuck Multi-substrate PTFE L2001A3-L2003D2-U2","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila spin coating system pairs the Standard V3 spin coater (L2001A3) with a dual syringe pump and a PTFE multi-substrate chuck, letting you dispense solutions under pump control while the substrate spins. The bundle includes a connection adapter, disposable syringes, PTFE tubing and needles, so automated, repeatable thin film deposition can start straight away.\u003c\/p\u003e\n\u003cp\u003eThe spin coater runs from 120 to 6,000 rpm with under 2% speed error and spin times of 1 to 1,000 sec, and accepts substrates up to 100 mm (4\") in diameter. The chuck holds four common substrate formats and has a rimmed edge, simplified drainage channels and finger cutouts for quick swapping.\u003c\/p\u003e\n\u003cp\u003eThe dual syringe pump drives two independently controlled channels in infusion or withdrawal mode, with clamps for syringes from 0.5 μl to 60 ml. Both units carry built-in software for saving multi-step programs without a PC, and either can be used on its own. Manual pipetting remains possible with the adapter fitted. This configuration is supplied with a Type B (US) power plug.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayer-by-layer spin coating of multilayered thin film structures using separately dispensed solutions.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching where the solvent must be added after a precisely timed delay.\u003c\/li\u003e\n\u003cli\u003eRepeatable, automated thin film fabrication that reduces human error in manual depositions.\u003c\/li\u003e\n\u003cli\u003eStandalone spin coating or standalone syringe pump dispensing for experiments needing only one unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003D2-U2-US\u003c\/li\u003e\n\u003cli\u003eSpin speed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eSpin coater dimensions (D x W x H): 225 mm x 170 mm x 140 mm\u003c\/li\u003e\n\u003cli\u003eChuck substrate sizes: 20mm x 15mm, 25mm x 25mm, 50mm x 50mm, 75mm x 25mm\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 2, independent channel control\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 260 mm\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003eOperation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003eRate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump motor: NEMA 17 stepper motor\u003c\/li\u003e\n\u003cli\u003ePlug type: Type B (US)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eThe spin coater has a magnetic safety switch on the door, and the syringe pump uses limit switches and crash sensing. Operate the pump at 5 °C – 40 °C and up to 80% RH at 31 °C.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":48282209550554,"sku":"OS240025","price":195541000.0,"currency_code":"IDR","in_stock":true}]},{"product_id":"ossila-spin-coater-single-syringe-pump-chuck-custom-pp-l2001a3-l2003s2-b1-u101-us-eu-uk-au","title":"Ossila Spin Coater Single Syringe Pump Chuck Custom PP L2001A3-L2003S2-B1-U101","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila Spin Coating System pairs the Standard V3 spin coater (L2001A3) with a single syringe pump, a connection adapter, disposable syringes, PTFE tubing and needles. It is built for labs that want automated, repeatable thin film fabrication with less manual pipetting and fewer operator errors. This configuration includes a custom polypropylene (PP) chuck and a US (Type B) power plug.\u003c\/p\u003e\n\u003cp\u003eThe spin coater runs from 120 to 6,000 rpm with speed stability within \u0026lt;2% error and accepts substrates up to 100 mm (4\") in diameter. Custom chucks may be up to 115 mm in diameter and are made to the substrate dimensions you specify. The syringe pump supports infusion and withdrawal, holds syringes from 0.5 μl to 60 ml, and drives them with a NEMA 17 stepper motor at a rate accuracy of ±0.16%.\u003c\/p\u003e\n\u003cp\u003eBoth instruments have built-in software, so no external PC is needed to create and store multi-step programs. The adapter can stay fitted while you dispense by hand, and the two units can also be used separately.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with syringe-controlled solution dispensing.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching, where the solvent must be added after a precise delay.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer spin coating of multilayered structures.\u003c\/li\u003e\n\u003cli\u003eCoating substrates of non-standard sizes using a chuck made to custom dimensions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003S2-B1-U101-US\u003c\/li\u003e\n\u003cli\u003eSpin coater model: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eMax custom chuck diameter: 115 mm\u003c\/li\u003e\n\u003cli\u003eChuck: Custom PP\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 1\u003c\/li\u003e\n\u003cli\u003eSyringe size: 0.5 μl to 60 ml\u003c\/li\u003e\n\u003cli\u003eOperation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003eRate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump motor: NEMA 17 stepper motor\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003ePlug type: Type B (US)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eOperate the syringe pump between 5 °C – 40 °C and at up to 80% RH at 31 °C. The spin coater has a magnetic safety switch on the door, and the syringe pump uses limit switches and crash sensing.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":48282209583322,"sku":"OS240019","price":154427000.0,"currency_code":"IDR","in_stock":true}]},{"product_id":"ossila-spin-coater-single-syringe-pump-chuck-custom-ptfe-l2001a3-l2003s2-u102-us-eu-uk-au","title":"Ossila Spin Coater Single Syringe Pump Chuck Custom PTFE L2001A3-L2003S2-U102","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis Ossila Spin Coating System pairs the Standard V3 spin coater (L2001A3) with a single-channel syringe pump, a connection adapter, disposable syringes, PTFE tubing and needles. Linking the two units gives automated, programmable solution dispensing onto a spinning substrate, so thin film depositions become more repeatable and less dependent on manual technique.\u003c\/p\u003e\n\u003cp\u003eThe spin coater runs from 120 to 6,000 rpm with speed stability better than 2% error and accepts substrates up to 100 mm (4\") in diameter. This configuration uses a custom chuck made from PTFE, built to the substrate dimensions you specify within a maximum chuck diameter of 115 mm. The syringe pump handles syringes from 0.5 μl to 60 ml, supports infusion and withdrawal, and is driven by a NEMA 17 stepper motor with a rate accuracy of ±0.16%.\u003c\/p\u003e\n\u003cp\u003eBoth instruments have built-in software, so multi-step programs can be created and stored without an external PC. Manual pipetting remains possible with the adapter in place, and each unit can also be operated on its own. This version is supplied for US mains (Type B).\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated, repeatable spin coating of thin films with controlled dispense rate and volume.\u003c\/li\u003e\n\u003cli\u003eAntisolvent quenching, where solvent must be added at a precisely timed point after the initial solution.\u003c\/li\u003e\n\u003cli\u003eLayer-by-layer spin coating of multilayered structures.\u003c\/li\u003e\n\u003cli\u003eCoating non-standard substrates using a custom PTFE chuck made to specified dimensions.\u003c\/li\u003e\n\u003cli\u003eStandalone syringe pump infusion or withdrawal for experiments that do not need the spin coater.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-L2003S2-U102-US\u003c\/li\u003e\n\u003cli\u003eSpin coater model: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eSpin coater materials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eSpin coater weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eMax substrate size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eChuck: Custom PTFE, maximum chuck diameter 115 mm\u003c\/li\u003e\n\u003cli\u003eSyringe channels: 1\u003c\/li\u003e\n\u003cli\u003eSyringe size range: 0.5 μl – 60 ml\u003c\/li\u003e\n\u003cli\u003ePump operation modes: Infusion and withdrawal\u003c\/li\u003e\n\u003cli\u003ePump rate accuracy: ±0.16%\u003c\/li\u003e\n\u003cli\u003ePump dimensions (W x H x D): 240 mm x 150 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003ePump motor: NEMA 17 stepper motor\u003c\/li\u003e\n\u003cli\u003ePlug type: Type B (US)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eOperate the syringe pump between 5 °C – 40 °C and at up to 80% RH at 31 °C. The spin coater has a magnetic safety switch on the door, and the pump includes limit switches and crash sensing. Use the built-in spirit level and adjustable feet to level the spin coater before use.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":48282209616090,"sku":"OS240026","price":161899000.0,"currency_code":"IDR","in_stock":true}]},{"product_id":"ossila-spin-coater-standard-chuck-multi-substrate-pp-l2001a3-u1-us-eu-uk-au","title":"Ossila Spin Coater Standard Chuck Multi-substrate PP L2001A3-U1","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Ossila Standard Spin Coater (L2001A3) is a compact, vacuum-free bench instrument for depositing uniform thin films from solution. This configuration comes with the multi-substrate polypropylene chuck, which holds four common substrate sizes: 20 mm x 15 mm, 25 mm x 25 mm, 50 mm x 50 mm and 75 mm x 25 mm. Because no vacuum line is needed, it runs from a single mains socket and fits on a crowded bench, in a fume hood or inside a glove box.\u003c\/p\u003e\n\u003cp\u003eSpin speed is programmable from 120 – 6,000 rpm with \u0026lt;2% error, and spin times run from 1 – 1,000 sec. The controller stores 10 user profiles, each holding 10 programs of up to 50 steps, which makes it practical for shared labs that rely on repeatable recipes.\u003c\/p\u003e\n\u003cp\u003eWithout vacuum suction, substrates stay flat and undamaged, including thin and flexible ones. The chuck has a rimmed edge for more even airflow and less solvent build-up, simplified drainage channels for stability, and finger cutouts for quick removal. The unit has a polypropylene bowl, steel casing and tempered glass lid, plus a magnetic door safety switch, built-in spirit level and adjustable feet.\u003c\/p\u003e\n\u003ch3\u003eLaboratory Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDepositing uniform thin films on substrates up to 100 mm (4\") diameter.\u003c\/li\u003e\n\u003cli\u003eCoating flexible or thin substrates without vacuum-induced warping.\u003c\/li\u003e\n\u003cli\u003ePreparing polymer thin films, such as block copolymer films, with controlled thickness.\u003c\/li\u003e\n\u003cli\u003eFabricating layers for perovskite solar cell research.\u003c\/li\u003e\n\u003cli\u003eSpin coating inside a glove box or fume hood where a vacuum line is impractical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Ossila\u003c\/li\u003e\n\u003cli\u003eProduct code: L2001A3-U1-US\u003c\/li\u003e\n\u003cli\u003eModel: Standard V3 (L2001A3)\u003c\/li\u003e\n\u003cli\u003eSpeed: 120 – 6,000 rpm\u003c\/li\u003e\n\u003cli\u003eSpeed Stability: \u0026lt;2% error\u003c\/li\u003e\n\u003cli\u003eSpin Time: 1 – 1,000 sec\u003c\/li\u003e\n\u003cli\u003eAcceleration\/Deceleration Control: No\u003c\/li\u003e\n\u003cli\u003eUser Profiles: 10\u003c\/li\u003e\n\u003cli\u003ePrograms per User: 10\u003c\/li\u003e\n\u003cli\u003eSteps: Up to 50 steps per program (on each user profile)\u003c\/li\u003e\n\u003cli\u003eMax Substrate Size: 100 mm (4\") diameter\u003c\/li\u003e\n\u003cli\u003eChuck: Multi-substrate polypropylene: 20 mm x 15 mm, 25 mm x 25 mm, 50 mm x 50 mm, 75 mm x 25 mm\u003c\/li\u003e\n\u003cli\u003eMaterials: Polypropylene bowl, steel casing, tempered glass lid\u003c\/li\u003e\n\u003cli\u003eSafety Switch: Magnetic safety switch on the door\u003c\/li\u003e\n\u003cli\u003eDimensions (D x W x H): 225 mm x 170 mm x 140 mm (8.86\" x 6.69\" x 5.51\")\u003c\/li\u003e\n\u003cli\u003eWeight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003ePower Supply: DC 24 V 2 A, via 100–240 V 50\/60 Hz power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eLevel the instrument using the built-in spirit level and adjustable feet before operation to keep the spinning axis flat. A magnetic safety switch on the door is fitted for safe operation.\u003c\/p\u003e","brand":"Ossila","offers":[{"title":"Default Title","offer_id":48282209648858,"sku":"OS240004","price":97140000.0,"currency_code":"IDR","in_stock":true}]}],"url":"https:\/\/amiscientific.com\/en\/collections\/spin-coater.oembed","provider":"AMI Scientific","version":"1.0","type":"link"}