Four-Point Probe

T2001A3

Four-Point Probe is an easy-to-use tool for the rapid measurement of sheet resistance, resistivity, and conductivity of materials.

Voltage range: ±100 μV to ±10 V

Current range: ±1 μA to ±200 mA (5 ranges)

Sheet resistance range: 100 mΩ/□ to 10 MΩ/□ (ohms per square)

Overall dimensions: Width: 145 mm Height: 150 mm Depth: 240 mm

Contact Angle Goniometer

L2004A1

Contact Angle Goniometer provides a fast, reliable, and easy method to measure contact angles and surface tensions of liquid droplets. 

Measurement Accuracy: ± 1o

Measurement Range: 5o - 180o

Overall Product Dimensions: Width: 95 mm; Height: 165 mm; Depth: 320 mm

Syringe Volume: 25 µl

Needle Diameter: 0.47 mm

Maximum Sample Thickness: 20 mm

Source Measure Unit

P2005A2

Measure the I-V characteristics of many devices including photovoltaics, LEDs and OLEDs, transistors, and more.

Computer Connectivity: USB-B and Ethernet

Measurement Connections: BNC connector

Dimensions: Width: 125 mm Height: 55 mm Depth: 185 mm

Potentiostat

T2006B1-UK

 Potentiostat is a powerful electrochemical measurement device for performing linear sweep voltammetry, cyclic voltammetry, open circuit potential, and controlled potential electrolysis.

Potential range: ±7.5 V

Potential compliance: ±10 V

Applied potential resolution: 333 µV

Current ranges: ±20 μA to ±200 mA (5 ranges)

Overall Dimensions: Width: 125 mm Height: 55 mm Depth: 175 mm

Solar Cell I-V Test System
T2003E3

Solar Cell I-V System is a low-cost solution for reliable characterization of photovoltaic devices. The PC software (included with all variants of the system) measures the current-voltage curve of a solar cell and then automatically calculates key device properties.

Substrate Size: ±7.5 V20 mm x 15 mm25 mm x 25 mm75 mm x 25 mm

Substrate Compatibility: T2002B, T2003B - S211T2002E, T2003E - S2006T2002F, T2003F - S241, S251

Overall Dimensions: Width: 150 mmHeight: 55 mmDepth: 300 mm

Solar Simulator
G2009B1

Solar Simulator is ideal for characterizing small-area solar cells.

Type: LED-Based, Steady-State

Spectral deviation: <70%

Spectral coverage: >80%

Working distance (cm): 8.5 cm

Irradiance (at working distance): 1000 W/m2

Maximum Lamp Time: 10000 hours

Dip Coater
L2006A1-UK

Ossila Dip Coater is the tool to coat high quality films at an affordable price.

Minimum Withdrawal Rate: 0.01 mm.s-1

Maximum Withdrawal Rate: 50 mm s-1

Rate Reproducibility: ±0.01% @ 1mms-1 ; ± 0.1% @ 10mm.s-1 ; ± 0.3% @ 50mm.s-1

Programmes: 20

Power Supply: DC 24V

UV Ozone Cleaner
L2002A3-UK

UV Ozone Cleaner is capable of removing contamination from the surface of substrates and samples.

Lamp Type: Low Pressure Mercury Discharge Lamp

Lamp Dimensions: 150 mm x 15 mm (Length x Diameter)

Number of Lamps: 4

Lamp Lifetime: T80 Lifetime 2000 Hours

Spin Coater
L2001A3-E461-UK

Spin Coater is ideal for spin coating in busy, fast-paced labs where space is at a premium.

User Profiles: 10

Programs: 10 programs on each user profile, with up to 50 steps each

Speed: 120 to 6000 RPM

Spin time: 1 - 1000 sec

Power supply: DC 24V 2A, via 100-240v 50/60Hz power adapter

LED Solar Simulator Lamp
G2009A1

The stand-alone solar simulator head is the same part as the one sold with the full product package and solar simulator I-V test system bundles.

Type: LED-Based, Steady-State

Spectral deviation: <70%

Spectral coverage: >80%

Working distance (cm): 8.5 cm

Irradiance (at working distance): 1000 W/m2

Maximum Lamp Time: 10000 hours