The AMI Instrument Doctor Blade Film Coater is a laboratory-scale thin-film coater assembled by AMI Scientific. Slurry is spread over a foil or flat substrate by a blade that travels at a controlled speed across a coating area of up to 300 x 400 mm, producing films of consistent thickness for experiments and small-scale production of battery, solar cell and sensor films.
The coated layer can be dried directly on the unit: the coating bed works as a hotplate up to 100 °C, assisted by a fan, so wet films can be cured without moving them to a separate oven. The instrument runs on single-phase 220 V AC power and draws 400 W.
- Coating battery electrode slurries onto metal foil.
- Preparing thin-film layers for solar cell research.
- Fabricating active layers for sensors.
- Optimising slurry formulation and film thickness at laboratory scale.
| Brand | AMI Instrument |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | — |
| Physical form | — |
| Storage | — |
- Coating Method: Doctor blade
- Blade Thickness Setting: 0-250 (x 0.01 mm)
- Blade Length: 275 mm
- Coating Area: 300 x 400 mm
- Blade Speed: 0.98-9.8 mm/s
- Maximum Temperature: 100 °C
- Drying Method: Hotplate + fan
- Power Supply: AC 1-phase 220 V, 400 W
Lay the foil flat without creases and keep the blade parallel to the foil surface before coating; a blade speed that is too high can leave the slurry uneven. Store the instrument on a flat surface at room temperature with the cover closed, and store the blade separately on a flat surface with its screws loosened.
—
