Nanografi Carbon Black Powder is a high-purity carbon material (CAS 1333-86-4) with a stated purity of 99.99% and a particle size of 4 µm. It comes as a fine, odorless black powder that is practically insoluble in water and remains chemically stable when stored and handled as recommended.
Its main role is as a black pigment and functional filler. Formulators and researchers use it in work on coatings, paints, inks, plastics and polymer-based materials where deep black coloration and opacity are needed. It can also be studied in formulations that call for modified electrical or surface behavior, with results depending on the specific system.
Because carbon black tends to form aggregates and agglomerates, the 4 µm value should not be read as the diameter of a single primary particle. Dispersion method, binder compatibility and processing conditions strongly influence color strength, viscosity and conductivity, so performance should be evaluated in the finished formulation.
- Black pigment and colorant in formulations requiring coloration and opacity.
- Pigmentation of paints, primers, enamels and industrial coatings.
- Black pigment for printing inks and specialized ink formulations.
- Pigment and functional filler in plastics and polymer composites.
- Coloration and coating formulations for textiles and fabrics.
- Carbon-based additive in research on electrically conductive polymer composites, subject to formulation-specific testing.
| Brand | Nanografi |
|---|---|
| CAS number | 1333-86-4 |
| Molecular formula | — |
| Purity | 99.99 % |
| Category | — |
| Pack sizes | 25 grams, 100 grams, 500 grams, 1000 grams |
| Physical form | Powder |
| Storage | — |
- Product code: NG01EM1501
- Particle Size: 4 µm
- Density: 1.79 g/cm³
- Melting Point: 3500 °C
- Appearance: Fine, black, odorless powder
- Water Solubility: Practically insoluble
Keep in a tightly closed container in a clean, dry place, away from ignition sources. Minimize dust generation and guard against electrostatic discharge, as fine carbon powders can pose combustible dust hazards. Work in well-ventilated areas with suitable protective equipment, avoid heating above 290°C, and consult the Safety Data Sheet.
—
