Green Graphene Quantum Dots (GQDs) from Nanografi are supplied as a ready-to-use dispersion in deionised water at 1.0 mg/ml. GQDs are zero-dimensional nanocrystals derived from graphene, built on a honeycomb lattice, and their very small size gives them distinctive electronic and optical behaviour. This grade consists of spherical dots below 10 nm in diameter that emit in the green part of the visible spectrum, between 530 and 560 nm.
Green emission lies away from the short-wavelength region where biological samples autofluoresce most, which often improves signal-to-background in cell and tissue imaging, and it fits standard FITC-type filter sets. As the most concentrated of the grades offered, the 1.0 mg/ml dispersion suits work where the material is diluted, cast into films or loaded into composites.
Excitation and emission wavelengths measured by PL spectrophotometry are included as standard. Particle size distribution, quantum yield and fluorescence lifetime can be measured as additional analyses for a separate fee.
- Light-emitting devices, photodetectors and solar cells that exploit strong, tunable photoluminescence.
- Bioimaging, biosensors, drug delivery and photodynamic therapy research.
- Chemical and biological sensors for ions, molecules and biomolecules, including agricultural sensors for plant health.
- Improving conductivity and charge storage in lithium-ion batteries and supercapacitors, and studies in fuel cells and photocatalysis.
- Water purification, pollutant detection and photocatalytic degradation of organic contaminants.
| Brand | Nanografi |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | 25 ml, 50 ml, 100 ml, 500 ml, 1000 ml |
| Physical form | — |
| Storage | — |
- Product code: NG10GNPW0970
- Product code: NG10GNPW0970
- Diameter: <10 nm
- Morphology: Spherical
- Emission wavelength range: 530-560 nm
- Color: Green
- Solvent: DI Water
- Concentration: 1.0 mg/ml
- Standard analysis: Excitation and Emission wavelength with PL Spectrophotometer
The emission range is specified in deionised water. Photoluminescence of GQDs is sensitive to pH, ionic strength and solvent, so buffers, salts or organic media may shift intensity and peak position; test any change of medium on a small volume first.
—
