This indium tin oxide (ITO, In203:Sn02) sputtering target from Nanografi is a source material for depositing ITO thin films by sputtering. It has a purity of 99.99%, a size of 3'' and a thickness of 0.250'', and is supplied as a single piece.
In sputter deposition, material is eroded from the target and deposited onto a substrate such as a silicon wafer. The technique works with substrates of many shapes and sizes, gives repeatable results, and can move from small research and development work to production batches covering medium to large substrate areas.
Depending on the process parameters, chemical reactions may take place at the target surface, in flight, or on the substrate. Because so many parameters are involved, sputtering is a complex process, but it gives experienced users considerable control over film growth and microstructure.
- Thin film deposition of ITO onto substrates such as silicon wafers.
- Sputter etching where high etching anisotropy is required and selectivity is not a concern.
- Material analysis by etching, as in secondary ion mass spectrometry (SIMS), to determine composition and detect very low impurity levels.
- Scaling sputtering processes from research and development to medium and large substrate production batches.
| Brand | Nanografi |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | 99.99% |
| Category | — |
| Pack sizes | 1 piece |
| Physical form | — |
| Storage | — |
- Product code: NG0ST01IN50
- Material: Indium Tin Oxide/ITO (In203:Sn02)
- Size: 3''
- Thickness: 0.250''
—
—
