KETJENBLACK EC-300J from Nanografi is an electro-conductive carbon black (CAS 1333-86-4) supplied as black free-flowing pellets. It is added to plastics, rubbers, coatings and other materials to make them antistatic or electrically conductive, reaching the conductivity of conventional carbon black at a much lower loading.
Its particular morphology and pore structure give a very high surface area of approx. 800 m2 /g (BET). As a result, roughly 1/2 to 1/3 of the usual loading delivers equivalent conductivity, which helps preserve the mechanical and rheological properties of the base resin or paint and makes processing easier for filler-sensitive polymers. Conductivity also drops very little when the material is blended with other components.
The grade works in thermosets, thermoplastics and elastomers. A low grit content (≤ 30 mg/kg) gives smooth surfaces in extrusion, and a very low ash content (≤ 0.05 %) makes it well suited to semicon layers in cable shielding. The loading required for a given conductivity depends strongly on the polymer type, and good dispersion is needed for best results.
- Antistatic and electroconductive compounds based on thermoset, thermoplastic and elastomer polymers.
- Semiconductive layers for cable shielding, where low ash content is required.
- Conductive coatings and primers that need high conductivity at low loading.
- Battery materials.
- Conductive packaging for IC parts, as well as tubing, flooring and carpet backing.
- Conductive components for automotive parts and cell phones.
| Brand | Nanografi |
|---|---|
| CAS number | 1333-86-4 |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | 25 gram, 100 gram, 500 gram, 1000 gram |
| Physical form | Black free-flowing pellets |
| Storage | — |
- Product code: NG01EM1503
- Pore volume, DBP: 310-345 ml/100g
- Surface area (BET): approx. 800 m2 /g
- Iodine value: 740-840 mg/g
- pH: 9.0-10.5
- Grit content: ≤ 30 mg/kg
- Volatile (wt%): ≤ 1.0
- Ash: ≤ 0.05 %
- Fines (wt%): ≤ 7
- Apparent bulk density: 125-145 kg/m3
- Moisture (wt%): ≤ 0.5
Keep KETJENBLACK EC-300J in a dry, well-ventilated area out of direct sunlight; exposure to direct sunlight for more than 30 minutes can damage the packaging.
—
