This lithium titanate (Li4Ti5O12, LTO) micron powder is a white anode material with a purity of 99+%, intended for lithium-ion battery research and cell development. LTO takes the place of graphite on the anode side of a conventional Li-ion cell and adopts a spinel crystal structure.
Compared with graphite anodes, LTO does not form an SEI film and avoids lithium plating during fast charging and low-temperature charging. It can be paired with LMO or NMC cathodes.
The powder has a D50 of 0.65~1.6 µm, a BET surface area of ≤18 ㎡/g and a first capacity of ≥160 mAh/g with a first efficiency of ≥95%. Recommended operating limits are a maximum charge voltage of 3.0 V vs. Li/Li+ and a discharge cutoff of 1.0 V vs. Li/Li+, with maximum charge and discharge currents of 5C and 10C respectively.
- Anode active material replacing graphite in lithium-ion batteries.
- Fabrication of cells combining an LTO anode with an LMO cathode.
- Fabrication of cells combining an LTO anode with an NMC cathode.
- Research on fast-charging and low-temperature charging battery cells without lithium plating.
| Brand | Nanografi |
|---|---|
| CAS number | 12031-95-7 |
| Molecular formula | Li4Ti5O12 |
| Purity | 99+% |
| Category | — |
| Pack sizes | — |
| Physical form | — |
| Storage | — |
- Product code: NG08BE0306
- Color: White
- Stable Temperature Range: Up to 720°C
- Recommended Maximum Charge Voltage: 3.0 V vs. Li/Li+
- Recommended Maximum Charge Current: 5C
- Recommended Cutoff Voltage for Discharge: 1.0 V vs. Li/Li+
- Recommended Maximum Discharge Current: 10C
- D10: 0.25~0.65 µm
- D50: 0.65~1.6 µm
- D90: ≤10 µm
- Tap Density: ≥0.92 g/c㎡
- BET Surface Area: ≤18 ㎡/g
- First Capacity / First Efficiency: ≥160 mAh/g / ≥95%
—
—
