This molybdenum oxide (MoO3) sputtering target from Nanografi is supplied as a single piece with a purity of 99.9%, a size of 2'' and a thickness of 0.125''. It is listed as an indium variant and serves as the source material for depositing thin MoO3 films by sputtering.
Sputtering is an established route for coating substrates of many shapes and sizes with thin films. The process is repeatable, works for small research and development runs, and can be extended to production batches covering medium to large substrate areas.
Depending on process settings, chemical reactions may take place at the target surface, in flight, or on the substrate. The number of adjustable parameters makes sputter deposition demanding, but it gives experienced users fine control over film growth and microstructure.
- Thin film deposition, where material eroded from the target is deposited onto a substrate such as a silicon wafer.
- Sputter etching in cases that require high etching anisotropy and where selectivity is not a concern.
- Material analysis by etching away target material, as in secondary ion mass spectrometry (SIMS) for determining composition and detecting very low impurity levels.
| Brand | Nanografi |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | 99.9% |
| Category | — |
| Pack sizes | 1 piece |
| Physical form | — |
| Storage | — |
- Product code: NG0ST01MO56
- Material: Molybdenum Oxide (MoO3)
- Size: 2''
- Thickness: 0.125''
- Variant: Indium
- Product code: NG0ST01MO56
—
—
