This Inconel 625 powder is a nickel-based superalloy supplied as spherical micron particles in the 5-25 µm range. It is intended for additive manufacturing and spray welding, where good flow and consistent quality matter.
The powder is made by argon atomization under clean-room conditions, giving high purity, repeatable batches and excellent flowability. The alloy combines high strength with resistance to oxidation and corrosion over a wide temperature range, and it holds up well against aggressive media.
These properties make it a common choice for parts used in aerospace, marine, nuclear and chemical processing, such as jet engine exhaust systems, thrust-reverser components, seawater structures and chemical process equipment.
- Aerospace parts such as jet engine exhaust systems, thrust-reverser components and shroud rings that face extreme temperatures.
- Marine and offshore items including seawater systems, ship ducting and mooring cables that need resistance to pitting and crevice corrosion.
- Power generation components for land-based gas turbines and nuclear facilities exposed to high-temperature oxidation and carburization.
- Chemical process equipment, flare stacks and ducting exposed to highly acidic and corrosive media.
- Cryogenic tankage and instrumentation parts that must stay tough at very low temperatures.
- High-performance automotive exhaust systems and industrial components subject to thermal cycling and corrosion.
| Brand | Nanografi |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | 25 grams, 100 grams, 500 grams, 1000 grams, 5 kg |
| Physical form | — |
| Storage | — |
- Product code: NG09PM0113
- Product code: NG09PM0113
- Material: Inconel 625, nickel-based superalloy
- Particle size: 5-25 µm
- Morphology: Spherical
- Production method: Argon atomization in clean-room conditions
- Drying before use: 120 °C, 2 hours
Weld strictly to the requirements of oxygen-acetylene flame or plasma spray welding. Use -150 mesh powder with small and medium spray welding guns and -150/+320 mesh powder with large guns. Dry the powder (120 °C, 2 hours) before use if it has absorbed moisture or has been stored for more than 3 months. This is a readily combustible metal powder with general toxic and irritating effects; the maximum allowable day concentration is 0.001 mg/m3. As a nuisance dust, inhalation may cause headache, elevated body temperature, vertigo and weakness.
—
