This PVDF (polyvinylidene fluoride) binder is a white fluoropolymer powder for lithium-ion battery electrode work, supplied as an 80 g set. In the electrode, it keeps active material particles and conductive additives bound together and attached to the current collector. It is most often used in cathode formulations, and it can also be applied to anodes and to separator design.
The grade has a purity of at least 99.5%, a molecular weight of 600,000 and a moisture content of no more than 0.1%. It dissolves to a transparent solution in NMP at 1g/10ml, and its listed melting point is 160-168 ℃. These properties suit solvent-based slurry processing.
PVDF is commonly studied with LiFePO4, LiCoO2 and NMC cathode materials, and it can be combined with conductive carbon black. Binder concentration, solvent choice, additive loading and drying conditions should be optimised for each chemistry.
- Polymer binder in lithium-ion cathode formulations to support active material cohesion, adhesion and mechanical integrity.
- Binding active particles in anode formulations and improving their adhesion to current collectors.
- Preparation of NMP-based electrode slurries for uniform mixing and coating.
- Maintaining electrode structure during coating, drying, calendaring and cell assembly.
- Research on polymer-based separator coatings and membranes for rechargeable lithium-ion batteries.
- Studies on binder concentration, electrode adhesion, mechanical stability and electrochemical performance.
| Brand | Nanografi |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | ≥99.5 % |
| Category | — |
| Pack sizes | 80g |
| Physical form | — |
| Storage | — |
- Product code: NG08BE1101
- Shape: White Powder
- Standard Specific Gravity (ASTM D 792 @23/23 ℃): 1.74~1.77
- Dielectric constant (ASTM D150): 4.50~5.50 (100MHz), 8.00~9.50 (100Hz)
- Melting Point (ASTM D 3418): 160-168 ℃
- Melting Index: 1-2 g/10min
- Solubility (30 ℃, 1hr, 1g/10ml NMP): Transparent and dissolvable
- Rotation Viscosity (1g/10ml NMP): ≥2000 mPa·S
- Intrinsic Viscosity (DMA, 30 ℃): 1.0-2.0 dL/g
- Moisture (Karl Fischer): ≤ 0.1 %
- Molecular Weight (ASTM D 5296-05): 600,000
Keep the powder in tightly sealed containers in clean, dry conditions and follow the product Safety Data Sheet. Limit airborne dust with suitable ventilation and protective equipment, and keep processing temperatures within recommended limits to avoid polymer degradation. NMP used for slurry preparation is a significant health hazard and requires appropriate exposure controls.
—
