This silicon (Si) nanopowder from Nanografi consists of spherical nanoscale particles with an average size of 50 nm, a purity of 97+% and an oxygen content below 3%. Compared with bulk silicon, these particles show distinct optical and electronic behaviour, which makes them a common choice in nanotechnology research on miniaturised devices, energy storage and optoelectronics.
The oxygen figure is given separately from purity because it reflects the native oxide layer that forms on silicon exposed to air. At 50 nm this surface oxide is a meaningful share of the mass, and in lithium-ion anode work it consumes lithium irreversibly during the first lithiation cycle. Keeping oxygen below 3% limits that loss, while the small particle size reduces the strain each particle experiences as silicon expands during cycling.
With a specific surface area of ≥100 m²/g, the powder offers a large electrode–electrolyte interface, so binder content and slurry solids developed for micron-scale silicon usually need adjusting. The fine powder form also integrates readily into composites and functional materials.
- Anode material research for lithium-ion batteries, where controlled oxygen content and small particle size are important.
- Microelectronics, integrated circuit and next-generation memory device research compatible with silicon-based technologies.
- Luminescent displays and light-emitting diodes to support brightness and efficiency.
- Photovoltaic conversion layers in solar cells.
- Building blocks for silicon nanotubes, nanowires and nanofibres.
- Reinforcing phase in nanocomposites to improve mechanical and electrical properties.
| Brand | Nanografi |
|---|---|
| CAS number | 7440-21-3 |
| Molecular formula | — |
| Purity | 97+% |
| Category | — |
| Pack sizes | 25 g, 100 g, 500 g, 1000 g |
| Physical form | — |
| Storage | — |
- Product code: NG04EO1805
- Average Particle Size: 50 nm
- Oxygen Content: < 3%
- Specific Surface Area: ≥100 m²/g
- Bulk Density: 0.05 g/cm³
- Crystal Structure: Cubic
With a bulk density of 0.05 g/cm³, the powder is very light and easily disturbed by air movement. Weigh it with minimal airflow and carry out transfers slowly in an enclosed setup. Review the MSDS for handling and personal protection requirements before use.
—
