Skip to product information
1 of 1

Nanografi

Super P Conductive Carbon Black

Super P Conductive Carbon Black
Regular price Rp 3.298.000,00
Regular price Sale price Rp 3.298.000,00
Sale Sold out
Shipping calculated at checkout.
Quantity
Quantity
Pembayaran hanya melalui request quotation dan dilakukan setelah tim kami menghubungi Anda. Mohon cantumkan nomor WhatsApp aktif untuk konfirmasi pesanan & pembuatan invoice. Estimasi pengiriman 1-2 bulan setelah pembayaran. Jika belum ada respons, hubungi +62 823-2282-4346.

View full details

Super P Conductive Carbon Black (C-NERGY Super P Li) from Nanografi is a specialty carbon black powder used as a conductive additive in lithium-ion battery electrodes. It builds electronic conduction paths between active material particles, helping to lower electrical resistance inside cathode and anode layers.

The material combines a moderate specific surface area of 62 m²/g with an absorption stiffness value of 32 ml/5g. Ash content is held at a maximum of 0.05%, metallic impurity levels are low, and the stable crystalline structure keeps moisture uptake minimal while providing good mechanical stability.

Super P is designed to be incorporated directly into electrode slurries without extra dispersing agents or a separate pre-milling step, giving homogeneous compounds and stable dispersion. Mixing conditions should still be tuned for each solvent and binder system. It can be evaluated with PVDF, SBR or PTFE binder formulations depending on the processing route.

  • Conductive additive in lithium-ion battery cathode and anode mixes to improve cyclability and cell life.
  • Conductive network support in cathodes based on lithium iron phosphate and layered oxide materials.
  • Maintaining conductive pathways in graphite- or silicon-based anode formulations.
  • Electrode slurry processing without additional pre-dispersing units or chemical dispersing agents.
  • Electrodes for energy storage systems needing higher energy density and improved power delivery.

Brand Nanografi
CAS number —
Molecular formula —
Purity —
Category —
Pack sizes 100 grams, 250 grams, 500 grams, 1000 grams
Physical form —
Storage —
  • Product code: NG04CO08028
  • Absorption Stiffness Value: 32 ml/5g
  • BET Surface Area: 62 m²/g
  • Ash Content: Max. 0.05%
  • Grit Content > 45 microns / 325 mesh: <2 ppm
  • Grit Content > 20 microns / 625 mesh: 12 ppm

Keep in tightly sealed containers in a clean, dry place and follow the product Safety Data Sheet. Limit airborne dust with containment, ventilation and personal protective equipment, and control dust build-up and ignition sources, as fine carbon powders can pose combustible dust hazards. Avoid contamination during weighing and mixing.

—