Molarity Formula and Molarity Calculator
Molarity Formula and Molarity Calculator
Calculate molarity, the mass of solute to weigh, or the solution volume. With step-by-step working, definitions and worked examples.
What is molarity?
Molarity (M) is the number of moles of solute in one litre of solution. Its unit is mol/L, written M (molar). A 0.2 M NaCl solution contains 0.2 mol of NaCl in every litre of solution.
Molarity is the most common concentration unit in the laboratory, because solutions are measured by volume with volumetric flasks and pipettes.
Molarity formula
Two other forms follow from the same formula: mass = M × V × Mr to find how many grams to weigh, and V = (mass ÷ Mr) ÷ M to find the solution volume.
Worked examples
Example 1: calculating molarity
5.844 g of NaCl (Mr = 58.44 g/mol) is dissolved in water to a final volume of 500 mL. What is the molarity?
- n = 5.844 g ÷ 58.44 g/mol = 0.1 mol
- V = 500 mL = 0.5 L
- M = 0.1 mol ÷ 0.5 L = 0.2 mol/L
Answer: 0.2 M
Example 2: mass to weigh
You want 250 mL of 0.1 M NaOH (Mr = 40.00 g/mol). How many grams of NaOH do you weigh?
- V = 250 mL = 0.25 L
- n = M × V = 0.1 mol/L × 0.25 L = 0.025 mol
- mass = n × Mr = 0.025 mol × 40.00 g/mol = 1.000 g
Answer: weigh 1.000 g NaOH, dissolve it, then make up to 250 mL in a volumetric flask.
Example 3: solution volume
You have 20 g of glucose (Mr = 180.16 g/mol). What volume of 0.5 M solution can you make?
- n = 20 g ÷ 180.16 g/mol = 0.1110 mol
- V = n ÷ M = 0.1110 mol ÷ 0.5 mol/L = 0.2220 L
Answer: about 222 mL of solution.
How to prepare a solution of a given molarity
- Calculate the mass with mass = M × V × Mr.
- Weigh the solute on an analytical balance and dissolve it in part of the solvent in a beaker.
- Transfer to a volumetric flask, rinse the beaker several times and add the rinsings to the flask.
- Make up to the mark with solvent, stopper and mix until homogeneous.
Molarity vs molality
| Molarity (M) | Molality (m) | |
|---|---|---|
| Divided by | solution volume (L) | solvent mass (kg) |
| Unit | mol/L | mol/kg |
| Temperature dependent | yes, volume expands | no |
| Used for | preparing solutions, titration | colligative properties |
More on the molality formula page.
Frequently asked questions
What is the unit of molarity?
Molarity is expressed in mol/L, written M (molar). Smaller units are mM (millimolar, 0.001 M) and µM (micromolar).
Is molarity the same as concentration?
Molarity is one unit of concentration. Others include molality, normality, percent (% w/v, % v/v) and ppm.
What if the volume is in mL?
Divide by 1000 to convert to litres, or use M = (mass ÷ Mr) × (1000 ÷ V) with V in mL.
Where do I find the molar mass?
Add up the relative atomic masses of all atoms in the formula. For common substances, pick one in the calculator above. For hydrates use the hydrate molar mass, for example CuSO4·5H2O = 249.69 g/mol.
What is the difference between molarity and normality?
Normality (N) counts equivalents, for example the number of H+ an acid releases. For H2SO4, 1 M = 2 N. A normality calculator is on the chemistry calculator page.
Prepare solutions with analytical-grade reagents
AMI Scientific is one of the official TCI distributors in Indonesia. Reagents with lot CoA & SDS, formal quotations and tax invoices for universities and laboratories.
Embed this calculator on your site
Free for teachers, lecturers and chemistry blogs. Copy the code below and paste it into your page in HTML mode.
Other formulas & calculators: mole, molality, normality, dilution, titration, pH, buffer, molar mass, ppm, mole fraction, mass percent, periodic table, chemical MSDS.