Palladium 10% on Carbon, MA type (wetted with ca 53% Water) TCI P3301

Chemical Identity

CAS No.: 7440-05-3

Rp 2.359.350,00

~~Rp 1.649.550,00~~ Rp 2.359.350,00

Sale Sold out

Shipping calculated at checkout.

Berat 5g 25g

Pembayaran hanya melalui request quotation dan dilakukan setelah tim kami menghubungi Anda. Mohon cantumkan nomor WhatsApp aktif untuk konfirmasi pesanan & pembuatan invoice. Estimasi pengiriman 2-4 minggu setelah pembayaran.

Dokumen Keamanan & Mutu

↓ Unduh SDS / MSDS (PDF resmi TCI)

CoA (Certificate of Analysis)

Spesifik per batch produksi — diterbitkan dan dikirim bersama barang sesuai nomor lot yang Anda terima.

Contoh CoA segera tersedia.

💬 Minta CoA via WhatsApp

View full details

TCI P3301 Palladium 10% on Carbon, MA type, is a heterogeneous hydrogenation catalyst made of 10% palladium on a carbon support. It is supplied wet, with approximately 53% water. Synthesis laboratories use it to speed up reactions with hydrogen. These include reducing functional groups and breaking carbon–heteroatom bonds by hydrogenolysis. The catalyst is a solid and stays separate from the reaction solution. You can remove it by filtration through a filter aid, so the isolated product contains less residual metal.

Several properties make this catalyst a preferred choice. The 10% palladium loading gives high activity. This suits substrates that react slowly and work where reaction times need to be shorter. The "MA type" label marks a manufacturer-specific formulation that differs from the standard M type. Researchers who need different activity or selectivity at the same metal loading can use it as an alternative. The water content of approximately 53% is a safety measure. It makes the catalyst less likely to ignite when it meets organic solvent vapours in air, so routine handling is safer.

In Indonesian laboratories, this catalyst suits medicinal chemistry research groups, academic organic synthesis laboratories and process development teams that run hydrogenation as a regular step. It works well in multistep routes where protecting groups must be removed or unsaturated intermediates reduced. Easy separation after the reaction makes purification simpler. The wetted form supports safer handling in teaching and research laboratories where many people share the same workspace.

Advantages (TCI brochure)

Neutral to slightly acidic type catalyst.
Suitable for reactions under acidic conditions.

TCI brochures (PDF)

Precious Metal Catalysts on Activated Carbon for Heterogeneous Selective Hydrogenation 2025-03-14 · p. 1
Hydrogenation Catalysts 2025-11-10 · p. 4
Transition Metal Catalysts 2026-04-10 · p. 13

Related TCI products

Reduction of functional groups: the high activity of the 10% palladium loading helps hydrogen react efficiently with susceptible functional groups, including on substrates that react slowly.
Hydrogenolysis of carbon–heteroatom bonds: the catalyst cleaves carbon–heteroatom bonds under hydrogen, which makes it useful for removing protecting groups during multistep organic synthesis.
Medicinal chemistry synthesis: easy removal by filtration helps give products with lower residual metal content, which matters for compounds intended for biological evaluation.
Shortening reaction times in route development: the high activity of this catalyst lets researchers complete hydrogenation steps faster, which speeds up iterative work during synthesis planning.
Screening for alternative selectivity: the MA type formulation differs from the standard M type, so researchers can compare activity or selectivity at the same 10% palladium loading.

From the TCI brochure

Aromatic nucleus
Hydrogenolysis
Hydrogenative dehydrations

Brand	TCI (product code P3301)
CAS number	7440-05-3
Molecular formula	—
Purity	—
Category	Chemistry > Catalysis and Inorganic Chemistry > Hydrogenation [Catalysis]
Pack sizes	as listed on the product page
Physical form	solid, 10% palladium on carbon, MA type, wetted with approximately 53% water
Storage	keep the catalyst wet in a tightly closed original container

Store the catalyst in its original, tightly closed container. This keeps the water content from evaporating, because the water is what reduces the ignition hazard. Keep it in a cool, well-ventilated area away from heat sources, ignition sources, flammable solvents and oxidizing agents. Do not let the catalyst dry out, especially after it has been used in a reaction and is saturated with hydrogen. Spent catalyst recovered by filtration should stay wet and be placed in a labelled waste container. Handle it in a fume hood and wear gloves, safety glasses and a laboratory coat. Add the catalyst to the reaction vessel before adding organic solvents, or under an inert atmosphere where possible. Always follow the safety data sheet supplied by the manufacturer.

—