The Ossila EPK-3 is a complete kit for polishing electrodes when simple rinsing with water or acetonitrile, or wiping with a solvent-wet tissue, no longer gets the surface clean. It brings working electrodes back to a fresh, reproducible condition.
The kit pairs an acrylic plate base with adhesive-backed polishing cloths and alumina polishing powders in 0.05 μm, 0.3 μm and 1.0 μm particle sizes. The 0.05 μm powder is the usual choice for removing residue from disc electrodes. Scratched surfaces can first be treated with the included 1200 grit sandpaper, then polished with the 1.0 μm, 0.3 μm and 0.05 μm powders in turn.
The black nylon cloth is matched to the 1.0 μm powder, while the coffee-coloured micro-polishing cloth is used with the 0.3 μm or 0.05 μm powder. Both cloths stick firmly to the acrylic base once their protective backing is removed and the acrylic surface has been cleaned and dried.
- Removing residues from disc electrode surfaces with 0.05 μm alumina powder.
- Restoring scratched electrodes by sequential polishing with 1.0 μm, 0.3 μm and 0.05 μm alumina powders.
- Pre-treating heavily scratched electrodes with 1200 grit sandpaper before alumina polishing.
- Maintaining electrodes for reproducible electrochemical measurements.
| Brand | Ossila |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | — |
| Physical form | — |
| Storage | — |
- Product code: C2018A1
- Model: EPK-3
- Order code: C2018A1
- Sandpaper: 5 × 1200 grit sandpaper (grey in color), Ø72 mm
- Nylon polishing cloth: 5 × nylon polishing cloth (black in color), Ø72 mm
- Micro-polishing cloth: 5 × micro-polishing cloth (coffee in color), Ø72 mm
- Base: 2 × acrylic plate base
- Alumina powder 1.0 μm: 1 × 15 g
- Alumina powder 0.3 μm: 1 × 15 g
- Alumina powder 0.05 μm: 1 × 15 g
- Spoons: 3 × spoon
Place about 0.5 g of alumina powder on the cloth, wet it with distilled water, and move the electrode over it in a figure-8 pattern while holding it vertically and firmly. Avoid pressing too hard, as the electrode may break. MSDS sheets are available for the kit and the alumina polishing powder.
—
