• Sistem Probe Ossila T2007B1-R/L (Probe System Micromanipulator 5 Μm Readout 2-4 Minimum Fine Motion) - AMI Scientific
1 1

Ossila

Ossila Micromanipulator 10 µm readout / 4-8 µm minimum fine motion T2007A1-R/L

Ossila Micromanipulator 10 µm readout / 4-8 µm minimum fine motion T2007A1-R/L
Rp 35.324.100,00
Rp 35.324.100,00
Sale Sold out
Shipping calculated at checkout.
Pembayaran hanya melalui request quotation dan dilakukan setelah tim kami menghubungi Anda. Mohon cantumkan nomor WhatsApp aktif untuk konfirmasi pesanan & pembuatan invoice. Estimasi pengiriman 1-2 bulan setelah pembayaran. Jika belum ada respons, hubungi +62 823-2282-4346.

View full details

The Ossila Micromanipulator T2007A1 is a manual XYZ positioner for guiding probes and tools at microscopic scale, whether you are contacting electronic components, working with 2D materials or handling single cells. This version uses micrometers with a 10 μm readout resolution; because adjustment is continuous rather than stepped, the smallest achievable motion is approximately 4-8 µm.

Each axis runs on precision linear bearings with spring loading to remove backlash, giving smooth, repeatable movement with minimal drift over a 6.5 mm graduated travel (10 mm maximum). The micrometers are aligned with their matching axes, so the probe can be steered without looking away from the microscope. A magnetic base and compact footprint allow several units to share a benchtop probe station, and right- or left-handed versions are offered.

A 20 μm tip tungsten probe of >99.95% purity is fitted as standard, with leakage current below 100 pA at ± 75 VDC and path resistance of ≤0.3 Ω. Connection is via SMA, with a supplied SMA to SMA coaxial cable and built-in cable clamp to reduce noise. The probe can be replaced with syringes, micropipettes, vacuum needles or optical fibers using a universal tool adapter.

Related products

  • Electrical characterization of semiconductor devices when combined with a probe station and source measure unit.
  • Low-current DC probing where small leakage currents and path resistance affect results.
  • Positioning and testing of small electronic components and 2D materials under a microscope.
  • Manipulation of single cells with micropipettes or syringes mounted via a universal tool adapter.
  • Multi-probe setups using several micromanipulators on one benchtop probe station.

Brand Ossila
CAS number —
Molecular formula —
Purity —
Category —
Pack sizes —
Physical form —
Storage —
  • Product code: T2007A1-R
  • Drive Axes: X, Y, Z
  • Drive Fine Movement: Micrometer
  • Maximum Axis Travel: 10 mm
  • Graduated Axis Travel: 6.5 mm
  • Micrometer Readout Resolution: 10 μm
  • Micrometer Head Thread Pitch: 50 threads per inch
  • Smallest Achievable Motion: Approx. 4-8 µm
  • Maximum Probe Diameter: 0.8 mm
  • Probe Material: >99.95% pure tungsten
  • Probe Tip Diameter: 20 μm
  • Probe Leakage Current: <100 pA at ± 75 VDC
  • Probe Path Resistance: ≤0.3 Ω
  • Probe Length: 32 mm
  • Probe Shaft Diameter: 0.508 mm
  • Probe Connection: SMA

—

—

Produk Terkait