Ossila

Ossila Electrical Characterization System (5 µm readout / 2-4 µm minimum fine motion) T2009F1

Name: Ossila Electrical Characterization System (5 µm readout / 2-4 µm minimum fine motion) T2009F1
Brand: Ossila
SKU: OS240069
Price: 458199000.0 IDR
Availability: InStock

Rp 458.199.000,00

Sale Sold out

Shipping calculated at checkout.

Pembayaran hanya melalui request quotation dan dilakukan setelah tim kami menghubungi Anda. Mohon cantumkan nomor WhatsApp aktif untuk konfirmasi pesanan & pembuatan invoice. Estimasi pengiriman 1-2 bulan setelah pembayaran. Jika belum ada respons, hubungi +62 823-2282-4346.

View full details

The Ossila Electrical Characterization System (T2009F1) is a complete bench-top platform for I-V testing of small-scale electronic devices. It pairs a manual probe station with a dual channel source measure unit, so samples such as photovoltaics, LEDs, OLEDs and transistors can be probed and measured with one setup.

This version uses fine-pitch micrometer micromanipulators with a 5 µm readout and smallest achievable motion of approx. 2-4 µm. The station sits on an aluminum optical breadboard with elastomeric vibration dampening mounts, and its ferromagnetic stainless steel platens hold up to 8 Ossila Micromanipulators. A vacuum chuck with selectable zones accepts substrates from 5 mm to 150 mm diameter, held by an oil-free diaphragm pump with an integrated gauge.

Samples are viewed through a monocular zoom lens and Sony IMX415 4K camera, streaming at up to 60 fps to a 15.6" 1080p monitor on a positionable arm. The SMU combines two source measure channels, two precision voltage sense channels and a shutter/trigger channel, covering -10 V to +10 V across five current ranges.

Related products

Measuring I-V characteristics of photovoltaic devices.
Electrical testing of LEDs and OLEDs.
Characterizing transistors and other DC semiconductor devices.
Triggering or synchronizing with other instruments through the shutter/trigger channel.

Brand	Ossila
CAS number	—
Molecular formula	—
Purity	—
Category	—
Pack sizes	—
Physical form	—
Storage	—

Product code: T2009F1
Footprint (L x W x H): 50 x 35 x 60 cm
Base: Aluminum optical breadboard, 25 mm hole spacing
Platen Capacity: Up to 8 Ossila Micromanipulators
Stage Travel: 25 mm (X, Y), 10 mm (Z), 360° (coarse rotation), 15° (fine rotation)
Substrate Size: 5 mm to 150 mm diameter
Chuck Type: Vacuum (selectable zones)
Chuck Leakage Current: <75 pA at ± 75 VDC
Vacuum Pump: Diaphragm (oil-free), 7 L/min, -680 mbar (-510 mmHg)
Microscope: Monocular Zoom Lens (0.6x – 5.0x optical zoom)
Camera Sensor: Sony IMX415 (4K, 1/2.8")
Total Magnification: 37x – 309x
Micrometer Readout Resolution: 5 µm
Smallest Achievable Motion: Approx. 2-4 µm
Probe Type: Tungsten, 20 μm tip diameter
SMU Voltage Range: ±10 V

The vacuum pump is suitable for air and non-flammable, non-corrosive dry gases only (e.g. nitrogen, argon) and exhausts externally; it should not be used with liquids or gases that need to be recovered. Keep the shutter/trigger BNC at 5 V, as higher voltages may damage the port.

—