The Ossila Probe Station Base (T2009A1) is the starting platform for a custom probe station built around small-scale experiments. It provides a stable, low-noise measurement environment, so electrical probing data stays consistent from run to run.
At its core is an aluminum optical breadboard with 25 mm hole spacing, which makes it straightforward to add extra components. Two ferromagnetic stainless steel platens, 150 mm high, offer room to mount up to 8 Ossila Micromanipulators and other magnetic accessories. Elastomeric dampening mounts give a natural frequency of 12 Hz and effective isolation above 17 Hz, while electrical grounding helps keep measurement noise down.
Samples sit on a 155 mm aluminum vacuum chuck with selectable zones that accepts substrates from 5 mm to 150 mm in diameter. The chuck stage travels 25 mm in X and Y and 10 mm in Z with 0.01 mm resolution, and adds 360° coarse and 15° fine rotation. Chuck isolation exceeds 99 MΩ at 500 VDC, with leakage current below 75 pA at ± 75 VDC.
- Building a custom probe station for small-scale electrical measurements on samples.
- Mounting and positioning micromanipulators on magnetic platens for device probing.
- Holding substrates from 5 mm to 150 mm in diameter under vacuum during testing.
- Low-noise, repeatable electrical characterisation that benefits from vibration isolation and grounding.
| Brand | Ossila |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | — |
| Physical form | — |
| Storage | — |
- Product code: T2009A1
- Base: Aluminum optical breadboard, 25 mm hole spacing
- Vibration Isolation: Elastomeric vibration dampening mounts
- Natural Frequency: 12 Hz
- Effective Vibration Isolation: >17 Hz
- Maximum Supported Load: 880 N total
- Platen Material: Ferromagnetic stainless steel
- Platen Height: 150 mm
- Platen Capacity: Up to 8 Ossila Micromanipulators
- Overall Dimensions (L x W x H): 50 x 35 x 19 cm
- Stage Travel: 25 mm (X, Y), 10 mm (Z), 360° (coarse rotation), 15° (fine rotation)
- Stage Resolution: 0.01 mm (X, Y, Z), 0.1° (rotation)
- Substrate Size: 5 mm to 150 mm diameter
- Chuck: 155 mm diameter, Aluminum, Vacuum (selectable zones)
- Chuck Isolation / Leakage Current: >99 MΩ at 500 VDC / <75 pA at ± 75 VDC
- Vacuum Connection: Ø=6mm Push-In Tube, Female port
—
—
