The Ossila OEM Source Measure Unit Set P2005Y2-5 supplies five fully functional SMU circuit boards, each packed in its own antistatic bag, ready to be built into equipment from other manufacturers. Every board combines four instruments: two source measure channels that output voltage and sense current, plus two precision voltage sense channels. A general-purpose shutter/trigger lets the board control, or respond to, other instruments.
The SMU channels work across -10 V to +10 V at DC or low frequencies, with five current ranges from ±20 µA up to ±200 mA and 10 speed and resolution settings. Output voltage is read directly at the BNC output, so load effects such as low impedance are accounted for. The Vsense channels resolve small voltages while keeping a ±10 V dynamic range.
Boards connect to a computer over USB-B or Ethernet and accept string commands, so they can be driven from Python, MATLAB, LabVIEW, Java, C/C++ and other languages. Front Panel software is included for independent channel control, sampling rate setup and saving data as .csv or .txt files. The same SMU underpins Ossila's four-point probe, solar cell IV, LED measurement and potentiostat systems.
- Integrating source and measure electronics into OEM instruments and test equipment.
- Measuring I-V curves of electronic devices.
- Characterizing solar cells, including lifetime measurements.
- Determining sheet resistance with a four-point probe setup.
- Supporting cyclic voltammetry as the basis of a potentiostat.
| Brand | Ossila |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | — |
| Physical form | — |
| Storage | — |
- Product code: P2005Y2-5
- Contents: 5 x OEM source measure unit PCB in antistatic bag
- Voltage source range: ±10 V
- Voltage source accuracy / resolution: 10 mV / 170 µV
- Voltage measure precision / resolution: 50 µV / 10 µV
- Current ranges: ±200 mA, ±20 mA, ±2 mA, ±200 µA, ±20 µA
- Best current resolution: 0.1nA
- Burden voltage: <20 mV
- Shutter/trigger level: 5 V
- Computer connectivity: USB-B and Ethernet
- Measurement connections: BNC connector
- Dimensions (W x H x D): 120.25 mm x 20 mm x 185 mm
- Rail dimensions (W x H x D): 5 mm x 1.6 mm x 160 mm
- Power adapter: 5 x 24 V / 2 A DC power adapter
- Operating system: Windows 11 (64-bit)
Each PCB is supplied in an antistatic bag. Keep the shutter/trigger BNC at a 5 V signal level, as higher voltages may damage the port.
—
