The Ossila Slot Die Coater is a complete benchtop system for depositing uniform thin films over a coating area of up to 150 cm². It combines a high-precision syringe pump, a heated stage and an interchangeable stainless steel slot die head, giving researchers a practical route from small-scale experiments towards scalable coating.
Stage speed can be set anywhere from 50 μm.s -1 to 75 mm.s -1, and the flow rate spans 0.5–624 μl.s -1 with a 5 ml syringe. Micro-step control delivers accurate solution flow with defined start and stop points. The hotplate reaches 140 °C, helping wetting and film drying, and a temperature offset can compensate for substrate-to-stage differences under high air flow. Gap height is tuned with two-point levelling using precision micrometer heads.
Interchangeable stainless steel shims and meniscus guides set channel thickness and stabilise the meniscus. A standard head handles 0 – 1000 cPs, while the high viscosity model covers 1000 – 10,000 cPs. The head is offered in 50 mm and 100 mm widths, and intuitive software supports multi-step programming.
- Coating uniform thin films over large substrate areas in research laboratories.
- Optimising film thickness and defect-free coatings by varying stage speed, flow rate and gap height.
- Depositing high viscosity inks and solutions from 1000 to 10,000 cPs with the high viscosity head.
- Studying the effect of stage temperature on wetting and film drying.
- Scaling up solution-processed films from lab-scale experiments.
| Brand | Ossila |
|---|---|
| CAS number | — |
| Molecular formula | — |
| Purity | — |
| Category | — |
| Pack sizes | — |
| Physical form | — |
| Storage | — |
- Product code: L2005A2-100-US
- Maximum Hotplate Temperature: 140 °C (284 °F)
- Maximum Coating Area: 150 cm2
- Stage Speed: 50 μm.s -1 to 75 mm.s -1
- Flow Rate Range: 0.5–624 μl.s -1 for a 5 ml syringe
- Syringe Speed: 6 μm.s -1 to 7.5 mm.s -1
- Stage Surface Roughness (RMS): <3 μm
- Stage Surface Flatness: <20 μm
- Linear Motion Levelness: 0.05% variation (50 μm/100 mm travel)
- Maximum Stage Travel Length: 150 mm (5.91")
- Maximum Head to Substrate Travel Distance: 13 mm (0.51")
- Viscosity Range: Standard: 0 – 1000 cPs; High Viscosity: 1000 – 10,000 cPs
- Head Material: Stainless steel
- Maximum Coating Width: 50 mm (1.97") / 100 mm (3.94")
- Power Supply: DC 24 V, 6.2 A, via 100 – 240 V 50/60 Hz power adapter
- Dimensions (D x W x H) / Weight: 360 mm x 280 mm x 190 mm / 10.35 kg
—
—
Produk Terkait
-
Ossila Solar Cell I-V Test System without Solar Simulator T2002F2
Regular price Rp 99.381.450,00Regular price -
Ossila Four Point Probe Original Soft-tipped probe head T2001A4
Regular price Rp 88.920.300,00Regular price -
Ossila Contact Angle Goniometer
Regular price Rp 104.611.500,00Regular price -
Ossila UV Ozone Cleaner L2002A3
Regular price Rp 125.533.800,00Regular price -
Ossila Dip Coater L2006A2
Regular price Rp 104.611.500,00Regular price -
Ossila LED Solar Simulator G2009B2
Regular price Rp 104.611.500,00Regular price -
Ossila Potentiostat without Electrochemical Cell and Electrodes T2006A1
Regular price Rp 73.228.050,00Regular price -
Ossila Source Measure Unit P2005A2
Regular price Rp 73.972.500,00Regular price
